Operation Manual
Chapter 5 – Project Setup
86
processing operation (see the Image Processing window below,
right part of the window).
Each IRISPowerscan project comes with a series of test images
(click the drop-down arrow on the right), but you can also use your
own test images. To import you own images in the Image
Processing window:
- scan them,
- select them from the application main viewer,
- right-click and copy them to the project setup (Copy to Project
Setup).
To define your image processing features:
In the Image Processing window, right part, select the image(s)
on which you want to test the results of the processing. Two
versions of the image are displayed: a small one and a large one.
The small one corresponds to the selected source image, the
large one dynamically shows the result of the processing
activated in the left part of the window.