Operation Manual

IRISPowerscan
TM
– User Guide
85
Image processing
Defining image processing operations
The Image Processing module is used to define the image
processing to be carried out on the images (contrast, binarization,
deskew, despeckle, black border removal, etc.), either during the
scanning, or after it.
The image processing to be performed during the scanning is set at
Project Setup level and is described below.
The image processing to be performed after the scanning is referred
to as image "adjustments". For instructions on how to apply them,
see: Post-scanning operations, Editing images, Adjusting images.
Once your settings have been defined, they are automatically
applied to all the images being scanned at the next scanning
process.
Tip:
You can create various image processing models, then later activate the one
that best fits your needs.
To access the Image Processing window:
 From the Project Setup Scanning tab, select the Image
Processing icon on the right.
The Image Processing window pops up with a preview pane on the
right in which you can directly check the results of any chosen