Operation Manual

Chapter 5 – Project Setup
82
Image is 180° rotated: tick this option to also test a patch code
after rotating the image by 180°.
Blank page
Defining and using blank pages
The Blank Page module is used to define the blank pages that will
be used to separate the batches/documents.
The detection will automatically take place during the scanning
process.
You must first define what should be considered as a blank page,
then determine how the detected blank pages should be used in your
project.
Caution:
A page is considered blank only if both the front and the rear sides are blank.
To access the Blank Page Setup window:
 From the Project Setup Scanning tab, select the Blank Page
icon on the right.
To define what is to be considered as a blank page:
 In the Blank Page Setup window, define what should by
considered as a blank page by the application in the Detection
method section, then fill in the required options in the Actions
section.