Operation Manual
Chapter 5 – Project Setup
80
Batch separation: to make the software create a new batch when
detecting the selected patch code.
Document separation: to make the software create a new
document when detecting the selected patch code.
Create attachment: to make the software create an attachment
when detecting the selected patch code.
Delete page: to make the software delete the page is the selected
patch code is detected on the page.
Patch based rotation: tick this option to rotate all the pages of the
document in the same manner as the lead page containing the patch
code.
Search also on 180° rotated images: tick this option to prevent
patch code read failure in case a page is scanned upside down. If the
patch code reading fails on a page, the software will thus look for
the zone after rotating the image by 180 degrees. This slows down
patch code reading.
Search also on rear images: tick this option to make the software
also look for the patch code on the rear sides of the images.