Operation Manual

IRISPowerscan
TM
– User Guide
79
X and Y: are coordinates of the upper left corner of the
barcode/OCR zone. The coordinates are in 1/100 of an inch and
represent the distance of the zone from the upper left corner of the
image.
Width and Height: width and height of the barcode/OCR zone in
units or 1/100 of an inch.
Patch code
Defining and using patch codes
The Patch Code module is used to define the patch codes to be
detected on the images in order to separate the batches/documents.
The reading will automatically take place during the scanning
process.
To access the Patch Code Setup window:
 From the Project Setup Scanning tab, select the Patch Code
icon on the right.
To define how to use a patch code:
 From the Patch Code Setup window, select the type of patch to
be detected, then the required options in the Action section: