Operation Manual
Chapter 5 – Project Setup
66
Deleting the OCR zone
You can always delete any OCR zone. Select the OCR zone and
right-click to access the context menu. Click Delete Selected
Barcode or OCR Zone.
Setting barcode properties
Once a barcode has been located on a document template, you can
define its properties (size, type, name, etc.). You can also tell the
software whether it must be used as separator for the
batches/documents, if it must be used to create attachments, etc.
To set the barcode properties:
Once you have drawn your barcode on the template image,
IRISPowerscan attempts to read the barcode in the zone and
automatically displays the Barcode Zone Properties window.
(Alternatively, select the barcode zone and click on Barcode
zone and OCR properties from the toolbar).
Select or fill in the required options in the Barcode Zone
Properties window. Click OK to confirm, then set the general