Operation Manual

IRISPowerscan
TM
User Guide
63
Note
Barcode zones are project-specific; not image-specific. Therefore, displaying
a new image will continue to display the zones as defined.
Define the barcode properties in the Barcode Zone Properties
window. See: Project setup, Scanning, Barcode/OCR, Setting the
barcode properties.
Once the barcode has been properly defined on the template
image, you can test it. See: Project setup, Scanning,
Barcode/OCR, Testing barcodes and OCR zones.
Modifying the barcode zone
You can always modify the barcode zone. Simply click on the
barcode zone and drag the whole rectangle or any of the red lines as
you wish.
Deleting the barcode zone
You can always delete any barcode zone. Select the barcode zone
and right-click to access the context menu; Click Delete Selected
Barcode or OCR Zone.