Operation Manual

IRISPowerscan
TM
User Guide
61
Enter a name in the Image name field. The image name should
not contain the following special characters: ", ?, *, ., >, <, /, \
Position the document in the feeder and click on the Scan button.
The image appears in the Scan Image window. (The current
Page Setup will be used for the scanning (see: Scanning, Page
Setup). Any auto-rotation, auto-cropping and deskew settings
will be applied to the scanned image before it appears).
If the image you scanned is acceptable, click OK to save it as a
template image.
2. To scan an image from the main window and copy it to the
Project Setup
Select the template image in the application viewer, right-click
on it, and select Copy to Project Setup.
The image is directly available in the Project Setup window,
Image field.
Defining barcodes
To define barcodes:
From the Project Setup Scanning tab, select Barcode/OCR to
access the Barcode and OCR Setup window. If your project