Operation Manual

IRISPowerscan
TM
– User Guide
57
Separation (based on batch or document counter)
The batch/document separation procedure is based on the number of
objects they contain.
Batch Level: set the number of documents after which the software
must automatically create a new batch.
Reset document counter (default): if you check this box, the
document counter is reset to 1 each time a new batch is being
created.
Document Level: set the number of pages after which the software
must automatically create a new document.
Tip:
The separation process can be set according to:
- OCR/ICR zones
- Patch codes
- Blank pages
To define such separation processes, select the corresponding modules in the
right part of the Scanning tab and click on Setup.
Refer to: Scanning, Barcode/OCR, Setting barcode properties, Setting OCR
zone properties, Defining and using patch codes, Defining and using blank
pages.
Tip:
The IRISFingerPrint add-on to IRISPowerscan provides an additional
separation process based on the general image layout. Get in contact with
I.R.I.S. to acquire such add-on. Then refer to the separate IRISPowerscan
Add-ons documentation.
Post-scanning
Seal batch: tick this option to seal your batches as soon as the
scanner stops scanning. If a batch is sealed, you will no longer be
able to scan new documents in it.
To unseal a batch: get to the main application window, Batches
pane, and select the batch to be unsealed. Right-click to access its
Properties window, and deselect the Seal option.