Operation Manual

Chapter 5 – Project Setup
56
Workspaces
Determine the order in which the workspaces will appear in the user
interface. Select the required and use the Move Up and Move
Down buttons on the right.
Event Handlers
Use this option if you want to change the standard behavior of the
application: you will then link another program to the application
thanks to an API. Refer to the white paper provided by I.R.I.S. on
this subject to define your settings (Setup button).
SCANNING
Scanning options
In the Scanning tab (of the Project Setup window, see: Project
Setup), you can set the document separation procedure as well as
post-scanning and compression options.
If you intend to use barcodes, OCR (ICR) zones, patch codes or
blank pages to identify, separate or index your documents, or if
you wish to set image processing operations, you must also define
the required settings in the various Scanning modules (access
through icons on the right).