Operation Manual

Chapter 3 – Starting up
34
 Select the required options in the Project Export window and
choose a destination folder for the export.
- Export scan cache images: select this option if you want the
scan cache images to be exported (this is necessary if you still
need to work on the images).
- Export emulation images: select this option if you want to
import the emulation images of IRISPowerscan.
- Export settings of scanners: select this option to import the
scanner settings of your project.
 Click on Export. The project is exported and becomes available
as a *.ips file*.
(*) In case of a project to be shared with other users, transmit the *.ips file to the
other users.
Tip:
If the project to be imported into IRISPowerscan was created with Kodak
Capture Software 6*, you must also make an export/import using the
IRISPowerscan interface. In the Project Export window, select the tab
From Kodak Capture Software., then click on Export.
(*) This is only possible if Kodak Capture Software is installed on the same
workstation as IRISPowerscan.