Operation Manual
IRISPowerscan
TM
– User Guide
33
Open in the Actions window), check and refine its settings in
the Project Setup window (see: Project setup), then start the
actual production workflow in IRISPowerscan.
IMPORTING/EXPORTING A PROJECT
! Feature available in IRISPowerscan Full Version only
The Import/Export feature of IRISPowerscan will be used if:
- you want to share the same project configuration with several
people, or if
- you want to import a project that was created with a previous
version of IRISPowerscan, or if
- you want to import a project that was created on another
workstation.
It will also enable you to import into IRISPowerscan any project
created with Kodak Capture Software 6*.
(*) This is only possible if Kodak Capture Software is installed on the same
workstation as IRISPowerscan.
! Any project must first be exported before it can be imported into
the application.
To export a project:
From the Start up window*, first select the project to be
exported, then click on Export (Export selected project) in the
Actions window.
(*) To import a project into an upgraded version of IRISPowerscan, first export
the project from the previous version of IRISPowerscan.