Operation Manual

Chapter 3 – Starting up

Tip:

You may also launch one of the Quick Projects available in IRISPowerscan

and directly start the scanning. See: About IRISPowerscan, How to use

IRISPowerscan, and Starting up, Using a Quick Project.

 If you start IRISPowerscan for the first time, you are

automatically prompted to register the application. Fill in the

required fields in the Registration window (see: Installation,

How to register?).

Once you have received your software key from I.R.I.S.,

introduce it in the required field of the Registration window and

click OK. This will unlock your software.

 The scanner selection window pops up on your screen. The

scanner installed on your computer is automatically displayed (if

not, click on Advanced, and select the right source). Select the

scanner and click OK to connect your scanner.

If you wish to use the application in Emulation Mode*, click

Cancel.

(*) A series of emulation images are provided with the application for

demonstration and testing purposes. The Emulation Mode is activated by default.

If you do not connect a scanner to IRISPowerscan, the Emulation Mode remains

activated.