Operation Manual

IRISPowerscan
TM
User Guide
153
SCANNING TASKS
Scanning operations
Important
Before you start scanning documents, remember to:
- Make sure the hardware key provided with your software is properly
plugged into your computer's USB port.
- Make sure your scanner has been properly installed and connected to
IRISPowerscan. See: Installation, Installing your scanner, Scanning, Scanner
selection.
- Define your scanning parameters in the Page Setup window. See: Scanning
operations, Page setup.
All frequent commands related to the scanning are available from
the main toolbar or from the Tasks pane.
To scan your documents:
Insert the documents in the scanner feeder.
Click on the Scan button in the main toolbar or on Start in
the Tasks pane. Use any other scanning features available in the
Tasks pane. Use the Batches pane to organize the hierarchical
structure of the scanned documents.