Operation Manual

IRISPowerscan
TM
User Guide
151
Check
Length: select the document format required for the images. All the
images that do not match the format (dimensions) specified in this
field will be dropped. If necessary, change the dimensions through
the Setup button.
Check first page: disable this option to ask the software not the
check the first page of your documents. (This is useful when you
scan e.g. envelopes as first pages (the envelopes are scanned as
headers). Because of their larger size, you do not want to check
their size.
Auto-delete images: you can set the size (in bytes) below which or
above which the images must be deleted. This can be used to delete
blank bitonal images (in TIFF G4 format).
Note that more advanced blank page deletion/detection option is
available in the application. It can be set at project setup level. See:
Project setup, Scanning, Blank page, Defining and using blank
pages.
Mask
Scan mask: this is used to define the region of the image to be
scanned.