Operation Manual
Chapter 6 – Scanning
148
will not be able to scan, and the following message will appear on screen:
To define your settings in the Page Setup window:
Select an existing page setup configuration from the Page name
field and modify it according to your needs: set your scanner
settings, image parameters, and required merge/split operations.
If you change the scanner options in the Twain user interface, it
is recommended to give the configuration a new name. The new
name will later appear in the top part of the user interface
(Scanner bar).
To save the configuration with the new name:
- Type in the new name in the Page Name field and click on the
Save icon on the right.
Click on OK to confirm your scanning configuration.
Scanner settings
To set the scanner settings:
Access the Twain user interface (press the scanner icon at the top
right of the Page Setup window) and introduce your scanner
settings. Click OK to confirm your settings in the Twain user
interface window.
Once you have confirmed your settings, the corresponding