Operation Manual

IRISPowerscan
TM
– User Guide
147
The scanner settings are disabled. They must be introduced in the Twain
user interface: select the scanner icon at the top right of the window to
access to the scanner Twain user interface.
Note:
If your scanner Twain driver version is prior to 1.9, the scanner icon will not be displayed
and the scanner settings will be enabled in the Scanner tab.
Important:
Enable communication between your scanner and IRISPowerscan
The first time you intend to scan with your scanner, you must first activate
the link between the scanner and IRISPowerscan. To do so, simply access the
Twain user interface, if necessary confirm or set your settings, then click OK
in the Twain interface. The corresponding scanner settings are automatically
activated in the Page Setup window, Scanner tab. Also confirm the settings
by clicking OK in the Page Setup window.
If you do not activate the link between the scanner and IRISPowerscan, you