Operation Manual
Chapter 5 – Project Setup
112
Click the Processing tab.
Select the desired extended connector from the list and click
Setup.
The configuration of the extended connectors is divided over
three tabs, in which the different options are grouped:
o the General tab
o the Indexing tab
o the Advanced tab
For more information on how to configure the extended connectors,
refer to the corresponding sections below: Configuring the general
options, Configuring the indexing options, Configuring the
advanced options.
Configuring the general options
On the General tab select the type of input documents you will
be scanning: Bitonal and/or Color/Grayscale.