Operation Manual
Chapter 5 – Project Setup
92
INDEXING
Indexing
The Indexing tab (of the Project Setup window, see: Project
Setup) is used to define the indexing fields that will be
automatically filled in by IRISPowerscan at batch and document
level. The validation of the indexing is handled by the user. It can
be done either during the scanning or after the scanning.
If your project contains documents/batches of different types, you
will also define them in this tab.
Defining batch/document types
To define various types of batches/documents, you must give them
a name and define their identifiers (barcodes and/or OCR zones).
To define a type of batch/document:
In the Indexing tab, choose the Batch or Document tab, then
open the Setup Index Types dialog box (click the Setup button
of the Type field).