Quick Start Guide

English English
Scanner memory
Thescanerhasabuilt-in512MBmemory.
AnSDcardandstandardUSBashdrivecanalsobeusedtoincreasethestoragecapacity.
Whenstoringimages,thescannerusesthethreepossiblememorytypesinthefollowing
priorityorder:
USB ash drive > Memory card > Built-in memory
Light indicators
RefertothetablebelowtoviewthelighngpaernsofthePowerandStatusindicators.
: Blinking green slowly : Steadily on green
: Steadily on yellow
: Off
: Blinking green rapidly
: Blinking yellow slowly
: Blinking yellow rapidly
Power
Status
Descripon
Scanning current original.
When the scanner is connected to a computer: the baery is fully
charged and the scanner is ready for use.
or
When the scanner is not connected to a computer: the scanner power
is on and the scanner is ready for use.
The scanner is powered off.
The baterry is fully charged (when scanner power is off and connected
to a computer).
Inializing system and memory devices.
Busy storing image file.
Reading/wring data in the scanner memory or storage devices.
Paper jam. Press the Power buon.
Calibraon error. Please refer to the complete User Guide.
Memory card full (free space below 1MB), card error, card locked or file
system not supported. Please use another card, delete some files from
the card, unlock the card or re-format the card to the FAT16 or FAT32 file
system.
The baery power is low.
The baery power is extremely low. Charge the baery immediately.
The baery is being charged when scanner power is off.
The baery is being charged when scanner power is on.