Operation Manual

User Guide
Operation
49
4.19.4 The Advanced Tab
The Advanced Tab contains the followings options:
 Default:
Click the “Factory Defaults” button to set Button Manager to factory default
settings.
 Register/Unregister:
The option is recommended to be used only by the software developers instead of
common users. Click the “Unregister” button to stop using Button Manager and
use other third-party button program.
 Scanner Buttons:
Click “Disable” to disable the buttons on the scanner. This option in used to
prevent users from touching the Scan button accidentally and start unnecessary
scans.
 Hotkey:
Check “Register System Hotkey” and select “Ctrl”, “Shift” or “Alt” to define your
hotkey to send your selected image to a specified destination. For example, if
you check “Register System Hotkey”, select “Ctrl” and click “OK”, then click your
selected image on Window’s Explorer and press the “Ctrl” key and number “6”
simultaneously. The selected image will be sent to your specified destination of
button 6.
 Button Profile:
This option allows you to import or export button profiles including scan settings
and destinations to Button Manager. By clicking the “Export” button, you can
save current profiles to a .bm file. By clicking the “Import” button, you can
import the previously saved .bm file to Button Manager.