Operation Manual

29
User Guide IRIScan
TM
Executive 4
Print Position (for digital imprinter)
Choose the position of your printed string. Choice: Top, Middle, Bottom, Custom. If Custom is selected,
enter the X and Y offset value to specify the position.
2.11 The Information Tab
The Information tab displays the following system and scanner information.
The Information tab dialog box
The following options are PC only:
The “Report” button
If you encounter any error message while using the scanner, click the Report button. A report.txt file
(C:\xxxx, xxxx indicates your scanner model) will be generated. Please send this file to the nearest service
center for trouble shooting.
The “Reset Pad Count” button
After scanning approximately 50,000 pages (the number varies based on type of scanner) through the Auto
Document Feeder (ADF), the ADF pad may be worn out and you may experience problems with document
feeding. In this case, it is highly recommended to replace the ADF pad with a new one. (Please refer to the
manual for proper replacing procedure.) For ordering the ADF pad, please consult your nearest dealer.
After replacing the ADF pad, click the “Reset Pad Count” button to reset the pad count.
The “Reset Roller Count” button
After scanning approximately 200,000 pages (the number varies based on type of scanner) through the
ADF, the ADF roller may be worn out and you may experience problems with document feeding. In this
case, it is highly recommended to replace the ADF roller with a new one. (Note the replacement of the ADF
roller has to be performed only by authorized service center. Therefore, please return your scanner for
roller replacement.) After replacing the ADF roller, click the “Reset Roller Count” button to reset the
roller count.
Note
The lifetime and the replacing procedure vary based on type of scanner.