Operation Manual

User Guide – IRIScan

Executive 4

2.6.2 Other Paper Selection

Scan Area

Choose your desired paper size with the drop-down list box. Or you may select a custom paper size by

clicking the Scan Area box and then click Add to include in the choice.

Choice: None, US Letter- 8.5”x 11”, US Legal – 8.5” x 14”, ISO A4 – 21 x 29.7 cm, ISO A5 – 14.8 x 21

cm, ISO A6 – 10.5 x 14.8cm, ISO A7 – 7.4 x 10/5 cm, ISO B5 – 17.6 x 25 cm, ISO B6 – 12.5 x 17.6 cm,

ISO B7 – 8.8 x 12.5 cm, JIS B5 – 18.2 x 25.7 cm, JIS B6 – 12.8 x 18.2 cm, JIS B7 – 9.1 x 12.8 cm,

Scanner Maximum, Long Page.

Long Page:

When you need to scan documents whose length exceeds scanner maximum, please choose Long Page.

Note if Long Page is selected, the Multi-Feed Detection will not be available. Options: Unknown Length,

Enter Length (Note: This option varies due to type of scanner.)

Choose “Unknown Length” if you have a batch of long page document with unknown length. Choose “Enter

Length” to enter the length and width of your documents or your desired scan size on documents. This is

useful when you have a batch of documents with the same scan size or a batch of same-sized documents.

OverScan

Overscan allows you to add a specific margin at top and bottom or right and left (Options vary based on the

type of scanner) of the edge of the image. This is used to reduce possible corner clipping on the skewed

images and often applied to a batch of skewed document to be scanned in the auto document feeder.

Select a value between 0 and +5 mm. Note the overscan result will not be shown in the Display window

and that the availability of the function varies based on type of scanner.

Transport Timeout

Set the amount of time the scanner will wait and then start auto scan after the first scan job is completed.

If you have many separate documents need to be scanned at the same scan settings, this feature is

especially useful. The default is 0. The value ranges from 0 to 30 seconds.

Note:

1 Within the specified timeout period, if you load your document to the feeder, the scanner starts

scanning automatically.

2 If your scanner has a flatbed option and you place your paper on the flatbed, after the timeout

period, you need to click the Scan button on the TWAIN user interface to start scanning.