Operation Manual

14
User Guide – IRIScan
TM
Executive 4
To load a profile,
1. From the Image tab dialog box, choose your favorable profile from the “Profiles” dropdown list box.
2. Your favorable profile will be immediately loaded and displayed on Scanner Properties dialog box.
To delete a profile,
1. From the Image tab dialog box, click “Profiles” to prompt the Edit Your Profile dialog box.
2. Choose the profile you want to delete from the dropdown list box.
3. Click “Delete”. A Confirm message “Are you sure you want to delete this profile?” is prompted.
4. Choose “Yes” to delete or “Cancel” to quit.
To rename a profile,
1. From the Image tab dialog box, click “Profiles” to prompt the Edit Your Profile dialog box.
2. Choose the profile you want to rename from the dropdown list box and then click the Rename button.
3. Enter new name for the profile.
4. Choose “Save” to save the new profile or “Cancel” to quit.
Note (PC only):
The preset default profiles include Flatbed, Simplex-B&W, 200 dpi, Simplex-Gray, 200 dpi, Simplex-Color,
200 dpi, Duplex-B&W, 200 dpi, Duplex-Gray, 200 dpi, Duplex-Color, 200 dpi. If you have a simplex or a
sheetfed scanner, the duplex or the flatbed option will not be available.