Operation Manual

26
User Guide – IRIScan Executive 4
- LDAP Server: Enter the IP address of your LDAP server.
- Port: Enter the port number of your LDAP server. Default: 389
- If the LDAP server requires a secure connection, check “This server requires a secure
connection”. Contact your System Administrator for the details.
- If the LDAP server requires authentication, check “Server requires authentication” and then enter
your account name and password.
- BASE DN: Enter your base DN. Base DN (distinguished name) identifies the starting point of a search.
A dn indicates what record to view in an LDAP tree. The top level of the LDAP directory tree is the
base, referred to as the "base DN". For example, you could indicate a base of dc=com, dc=net for a
search that starts at the top and proceeds downward. Contact your System Administrator for the
details.
- To test if your setting of LDAP server is OK, click the “E-mail” tab.
a. Click “To”, “CC” or “Bcc”, a Search dialog box appears.
b. Enter the keyword to search on the “Searching” field . The search result containing your
keyword will be displayed.
c. Select your desired e-mail address  and click “To”, “CC”, or “Bcc” which you need to set the e-
mail address . The e-mail address will be pasted on your selected field.
6. Click “OK” to complete.


