Operation Manual

4/6 GettingStarted–English
Tips
Addingatimestamptoyourimages
YourIRIScan
TM
Book2scanneraddsatimestamptotheimagesyouscan.Thisway,youknowexactly
whentheywherescanned.

TogetacorrecttimestamptheTimeSettings needtobeset:
 PresstheScanbuttonfor2secondstopoweronthescanner.
 Insertapointyobject,
likeapaperclip,intotheTimesetbutton:
1. ThenpressC/BWorDPItochangethe(1)year.PressScantoconfirm
andmoveontothe(2)month.
2. Repeatstep1forthe(2)month,(3)date,(4)hourand(5)minutes.

Scanningsmall,thickbooks
Whenyou’rescanningasmall,thickbookitmayoccurthatthemarginistoonarrowandyou’renot
abletoscantheentiretext.

Youcansolvethisproblembyscanningthepageshorizontallyandrotatingyourimageswith
Readiris
TM
.

Anothersolutionistoplacethescanneratthebottomofthepage,turnitupsidedownandscan
upwards.You’llnoticethatthescanner’srightmarginissmallerthantheleft.

