Quick Start Guide

English
Light indicators
Refer to the table below to view the lighng paerns of the Power and Status indicators.
: Blinking slowly
: Blinking rapidly
: Steadily on
: O
Power Status Descripon
color(*)
•
When the scanner is connected to a computer: the baery is fully charged
and the scanner is ready for use.
or
•
When the scanner is not connected to a computer: the scanner power is on
and the scanner is ready for use.
green color(*)
Scanning current original.
orange color
The baery is being charged when scanner power is on.
orange color(*)
Reading/wring data in the scanner memory or storage devices.
orange
The baery is being charged when the scanner power is o.
orange color(*)
The baery power is low.
•
The scanner is powered o.
•
The baery is fully charged (when scanner power is o and connected to a
computer).
green color(*)
•
Inializing system and memory devices.
•
Busy scanning and storing image le.
green color(*)
•
Paper jam. Press the Power buon.
•
Calibraon error. Please refer to the complete User Guide.
color(*)
No memory card, card full (free space below 10MB), card error, card locked
or the le system is not supported. Remove les from the card to clear space,
unlock the card if it is locked, or try another card.
orange color(*)
The baery power is extremely low, and the scanner will power o
automacally in 5 seconds. Charge the baery immediately.
(*) The following colors indicate the current resoluon:
Green = 300 dpi (default seng)
Orange = 600 dpi
5. FAQ and Technical Support
Should you experience issues when using your Readiris
TM
, Cardiris
TM
or the IRIScan
TM
scanners
consult the Frequently Asked Quesons on our website www.irislink.com/support/faq or
contact Technical Support at www.irislink.com/support.
Power Status