User Manual

6
User Guide – IRIScan™ Desk
3.3 Hardware installation
After installing the IRIScan™ Desk software, you can install your IRIScan™ Desk device. Double check the following procedure before
you proceed:
1. Place the ScanPad on your desk next to your PC, and then place the IRIScan™ Desk on the far end of the ScanPad (some marks are
drawn on the mat).
WARNING: The dark color ScanPad is used to ensure a good image and accurate cropping of the targeted objects. Not using it
may give bad results.
2. Connect the IRIScan™ Desk device to your PC via a USB cable.
3. Now you are ready to proceed to the next step for the software installation process.
If the device is not detected correctly, the detection keeps turning and a message is displayed on the screen to help you. See also
Troubleshooting.
WARNING: This software is distributed with a dedicated document camera: the IRIScan™ Desk. This software can bring out its full
and powerful potentials only when working with the qualified document camera hardware. If working with non-qualified
document cameras, some or all of the features in this software might NOT work.