Use and Care Guide

ManualsBrandsIris ManualsSecurity Alarm Keypads3405-L2

key features

Large LED Status Indicators:

The Lowe’s Iris Security Keypad features large light bars for displaying the

security system’s status. Positioned above and below the keypad, these indi-

cators display multiple colors to show the type of arming selected.

Proximity Sensor:

The built-in proximity detector recognizes when a user’s hand is nearing the

device and triggers the keypad to wake. When the keypad wakes, the status

LED and keypad backlight activate.

Audible Feedback for Arming:

The keypad’s audible feedback driver provides users with alerts, key press

conﬁrmation, and arming countdown.

Easy 2-Step Join Process:

The Security Keypad is factory-conﬁgured to search for open ZigBee net-

works the ﬁrst time it is powered on. Simply open the hub for joining, insert

batteries into the keypad, and it will search and join any open network.

KEYPAD

Iris Keypad can be placed near entry points

to easily enable or disable your alarm.

lowe’s item #

690406

model

3405-L

network indicator

system status led

low battery

back mountingfront

getting started

Step 1

Put your Iris hub in pairing mode

by selecting the + sign and then

“Devices” in the App.

Step 2

Remove the battery tab labeled

“Remove to Pair”. The hub will

beep when pairing is complete.

compatibility

The Lowe’s IRIS Keypad is fully

ZigBee HA 1.2 certiﬁed and will

work with other open ZigBee

HA 1.2-certiﬁed systems.

two cr-123a batteries

use supplied bracket

to mount the keypad

remove to pair tab

wall mount

tamper switch

(under the

mounting

bracket)

4.50”

59.4 mm

3.13”

37.8 mm

1.00”

21.6 mm

Summary of content (3 pages)

PAGE 1
KEYPAD lowe’s item # 690406 model 3405-L Iris Keypad can be placed near entry points to easily enable or disable your alarm. 1.00” 21.6 mm low battery system status led network indicator two cr-123a batteries use supplied bracket to mount the keypad 4.50” 59.4 mm wall mount tamper switch (under the mounting bracket) remove to pair tab 3.13” 37.
PAGE 2
KEYPAD lowe’s item # 690406 led behaviors model 3405-L arming Pattern Name Pattern Description When It Occurs Busy Flash arm LED’s back and forth Joining or communication with hub has been lost Join Scanning One blink every 3 seconds Looking for a network Joined Network Rapid blink Successfully joined the network Armed Mode When the system is armed When the system is armed the status LEDs (located at the top of the device) will be red as well as the Arm key for the specific arm mode the d
PAGE 3
KEYPAD lowe’s item # 690406 model 3405-L troubleshooting approvals (english) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: Step 1 (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Step 2 Conforms to FCC Part 15B Contains FCC ID: T3L-SS011 IC: 12192A-SS011 Remove and replace batteries.