Use and Care Guide

key features
Easy Mounting Options
The Iris Motion Sensor can be installed on a wall or in a corner using includ-
ed adhesive strips.
Remove-to-Pair Join Process
All Iris sensors feature “remove-to-pair” joining. The device ships with the
battery pre-installed and all that is needed to begin the joining process is to
pull out a small plastic tab from the bottom of the device. There is nothing for
the user to take apart or put back together.
Superior Output Power & Over-the-Air Updates:
The Iris Motion Sensor can detect motion up to 15-ft and supports over-the-
air updates providing for seamless upgrades and feature additions without
need for any user interaction.
getting started
Step 1
In the Iris by Lowe’s App, select the + sign and then “Devices.”
Step 2
Remove the battery tab labeled “Remove to Pair”. The hub will beep
when pairing is complete.
mounting*
The Iris Motion Sensor has 120◦ coverage. For best results when mounting
the motion sensor:
• Below 5 feet, battery door should face down.
• Above 5 feet, battery door should face up.
MOTION SENSOR
Iris Motion Sensor detects movement up to 15 feet and reads tempera-
ture, helping you monitor your home and protect your family.
lowe’s item #
690402
model
3326-L
user guide: iris motion sensor (3326-l) © 2015 lowe’s iris. all rights reserved.1 / 2
battery (cr-2)
reset button
slide out to open
led
front
below 5 ft.*
pairing battery
use case
• Save energy by turning o
lights in areas that aren’t
being used
• Receive alerts if motion is
detected while you’re away
• Create custom automatic
flood light and entry scenes
• Use time-based motion trig-
gers to light a path at night
compatibility
The Lowe’s IRIS Motion
Sensor is fully ZigBee HA 1.2
certified and will work with
other open ZigBee HA 1.2-
certified systems.
1.60”
41 mm
1.70”
43 mm