Owner Manual

CLEANING AND MAINTENANCE
Mesh Dust Filter
Please clear and clean regularly to maintain higher suction capabilities.
1 Remove the dust cup.
Press the buttons on either side of the dust cup to remove it.
Dust cup
Button Button
2. Remove the mesh lter in water.
To avoid splattering of dust, please remove the mesh filter from the
dust cup in water.
3. Clean the mesh lter.
Remove the dust stuck to the filter, then rinse the filter with running
water.
Soak the dust cup in water with a diluted cleaning agent for several
minutes for easy removal of accumulated dust.
4. Dry.
Place the dust cup and filter in a well ventilated area until fully dry.
*When cleaning the mesh filter set, please do not use washing
machine or other heated device as this may cause product
deformation.
5. Reassemble the mesh lter set.
Place the mesh filter set back into the dust cup.
*Pay attention to the direction.
Please reassemble correctly to avoid
damaging the product.
CAUTION
上
Dust cup
Mesh filter set
6. Reattach the dust cup.
Place the mesh filter set in the dust cup, and then place the dust cup
back into the vacuum body until you hear it click into place.
Please verify that both buttons are clicked firmly in place.
Dust cup
Clicking
sound
Please follow the instructions below for replacing the mesh dust filter, mesh exhaust filter, and battery.
REPLACEABLE COMPONENTS
Dust Filter Replacement
*Please see Cleaning and Maintenance (P9) for how to remove
filter set.
1. Remove the dust lter.
• Press the filter frame with fingers.
• Pull the filter button out of the hole and the filter away
from frame.
2. Insert new dust lter.
• Insert the joint jaw of the new mesh filter into the frame.
• Press the filter button into the frame until it clicks into
place.
Filter frame
Mesh dust filter
Remove
Push in
Insert joint jaw
Insert
Exhaust Filter Replacement
1. Remove exhaust lter cover.
• Use a coin to pull out filter covers on both sides.
2. Change exhaust lter.
• Remove filters from both sides and insert new filters.
3. Replace lter cover.
• Put both filter covers back into place.
Exhaust filter cover
Exhaust filter
Battery Disposal
Replace battery as instructed above. Please dispose of old battery according to proper governmental regulations.
Battery Replacement
1. Remove the battery.
• Remove the battery by pressing the battery release
button.
2. Assemble the new battery.
• Insert the new battery facing correctly until it clicks into
place. Failure to do so could result in battery falling out
and breaking.
Battery release button
Battery
Insert until clicking
sound is heard
9 10