Owner Manual

HOW TO USE
Magnet
Dust Sensor
Dust and dust mite sensor works during use, and light
indicates the amount of dust on the surface area.
*When cleaning carpets or other items with high dust levels,
indicator light will not turn green.
Bedding Sensor
Device will conserve power and decrease speed when both
sensors lose contact with the object being cleaned.
Dust Indicator light
Not clean
Almost clean
Clean
RED
YELLOW
GREEN
Dust Indicator light
Bedding sensors
Cleaning and maintenance must be done after removing the battery.
Please do not splash water on the vacuum body as this could cause damage.
Use a diluted neutral cleaning agent.
Use of strong cleaning agents such as amyl acetic ester, alcohol, oil, etc. can cause fading,
deformation or breakdown.
CAUTION
Using the product in dusty condition can cause it to malfunction. Check and clean the product regularly.
Vacuum Body
Fully wring out a rag and use it to wipe down the body and any
remaining cleaner.
Terminal
Battery
Please use a dry rag on the terminal parts of the battery to clear
out accumulated dirt which can disrupt product use.
• Incorrect assembly of the mesh filter and dust cup can
allow dust and dirt inside which can damage the terminals.
Dust Indicator Sensors
Remove the dust cup and clean both sides of the sensors with a
cotton swab.
• Please clean regularly to avoid dust buildup, causing sensor
to function poorly.
Dust sensors
Collection Head
• Clean hair, string and other small objects from the dust
intake port using tweezers to prevent dust buildup and
decreased suction. Please clean it regularly.
• Please clean dirt on the agitator with a brush.
• Please clean bedding sensors with a cotton swab.
• Clean regularly to prevent dust buildup causing sensors to
function poorly.
Agitator
Bedding sensor
CLEANING AND MAINTENANCE
Cleaning Bedding
1 Please spread out the bedding or mattress pad to lay flat
(no folds).
2 Adjust the vacuum to the horizontal position.
3 When the device is in High mode, move back and forth
every 10 seconds.
Please do not forcefully press down the collection head.
Adjusted to 90°, the device will not work.
• Adjusted to the horizontal position, the collection
head is fastened in place by a magnet.
• When cleaning furniture, cushions, carpets, etc.
with the collection head in between, the head is not
locked in place and may be unstable.
7 8