User Manual

34
3) Make sure the Bluetooth pairing device is within the coverage range. Tap Scan to
start scanning.
4) Tap STOP if you would like to stop the device from scanning.
5) Select the device that wish to be connected and tap Connect.
6) A Print UI window will pop up if the channel is not stated. Insert channel between 1 to
30, channels below 1 or above 30 are bad channels. Then press OK.
7) An Authentication Request window will pop up. Enter the same PIN for both devices.
Once the device is successfully connected, a window will pop up. Tap OK to complete
the connection.
Channel between 1 to 30
Name of the pairing
device