iridium Arc Bar Pro 1215 IP65 12x15W RGBW LED Product code: 113531
Product Overview DMX-IN POWER-IN MENU DOWN 1 UP ENTER POWER-OUT DMX-OUT
454.01mm 1017mm 85mm 68.5mm 140mm 2 215.3mm 60.
Packaging: Thanks for your purchasing the AH019A. All the lights have been checked and are in excellent operating condition. Please check the shipping carton first. Because there maybe damage occurred during the shipment. Then check the lights carefully and be sure that the light is intact and works normally. In the event damage has been found, spare parts are missing or the lights works abnormally, please contact us for further instructions.
Features ● Light Source: 12*15W, 4 in 1 RGBW LEDs ● Lens:10*45°/8°/25°/40° ● Power consumption: 160W ● Voltage: AC 110-230V 50/ 60Hz ● Run mode: DMX 512 /Master Slave /Auto Run ● DMX channels: 3, 7, 11, 48 & 52 CH ● Built-in Effect: color mixing, variable color chasing, strobing and fading ● Fan controlled by PWM waves ● 4 dimmer curves ● TFT displayer with four buttons ● Material: Aluminum body ● IP65 ● Temperature: -20°C～40°C ● Dimension:1017×140×216mm ● N.W: 9.1 KG ● G.W: 10.
Displayer introduction ①② ③ DMX DMX ④ ⑤ temp:043 [ ADDRESS ] 001 Key lock open MENU DOWN UP ENTER 1. DMX means the light is in the DMX mode.Similarly,SLAVE means the light is in the SLAVE mode. 2. The color of the point shows the condition of signal transmission. Green represents the good condition, while red represents the signal is interrupted. 3. The item shows the working temperature of the light.
Programme Menu CHANNEL 003 CHANNEL 007 DMX CHANNEL DMX ADDRESS 001 ADDRESS 512 CHANNEL 011 CHANNEL 048 CHANNEL 052 Standard Stage/TV Archited DMX Curve Theatre Blackout DMX State DMX Hold Slave Mode Slave 1 Auto 13 Auto Mode 1 Speed 31 Red Static Color Green Blue White 1 Color 63 0 Strobe 20 6
2700K CCT 8000K 000 Dimmer ALL Set up White Blance 255 red green 000 blue 255 white ON Remote OFF OFF Key lock 5s ON Display 30s Max temp Password Working time 00000h - 0M Software Ver V.1.2 Hardware Ver V.1.
DMX control mode Channel 3CH 7CH Value Function 1 0-255 Hue 2 Saturation 3 0-255 0-255 1 0-255 Master Dimming(0~100%) 2 0-255 Dimmer curve 3 Red dimmer 4 0-255 0-255 5 0-255 Blue dimmer 6 0-255 7 1 0-255 0-255 White dimmer Strobe Master Dimming(0~100%) 2 0-255 Dimmer curve 3 0-255 Red dimmer 4 0-255 Green dimmer 5 0-255 Blue dimmer 6 0-255 White dimmer 7 0-255 Strobe 8 0-7 10 11 Green dimmer none 8-255 Marco Color 0-255 CCT 0-8 none 9 - 27 auto 1
48CH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 9 Red Green Blue White Red G
48CH 52CH 45 46 47 48 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 10 Red Green Blue Whit
52CH 41 0 - 255 Red 42 0 - 255 Green 43 0 - 255 Blue 44 0 - 255 White 45 0 - 255 Red 46 0 - 255 Green 47 0 - 255 Blue 48 0 - 255 White 49 0 - 255 Red 50 0 - 255 Green 51 0 - 255 Blue 52 0 - 255 White Channel 52 (Id address set) 0--9 10--19 20--29 30--39 40--49 50--59 60--69 70--79 80--89 90--99 100--109 110--119 120--129 130--139 140--149 150--159 160--169 all Ids Id1 Id2 Id3 Id4 Id5 Id6 Id7 Id8 Id9 Id10 Id11 Id12 Id13 Id14 Id15 Id16 170--179 180--189 190--199 200--209
DMX-512 addressing with ID address 1. Follow instructions 1 for DMX 512 addressing. 2. Activate ID addressing in each fixture by setting panel function “ID ON/OFF” to ON. “Settings” to “ID ON/OFF” to “ON” For every DMX 512 starting address the user can set 66 separate ID addresses. Set ID addresses in each fixture by setting panel function “ ID address” to incremental values.(l.e. 1, 12, 24, 36 etc...) “Settings” to “address” to “01~66”.
DMX MODE-In this menu,you can connect several pieces of lights with DMX cable and control them with the control console. Press ”ENTER” and then press “UP” or “DOWN” to ”Address” or “DMX Channel” and press “ENTER”. 1) “XXX” will be showed in “Address”, "XXX” means the Address 001-512. You can press “UP” or “DOWN”to select the address you desired. 2) “Channel [xx]” will be showed in “DMX Channels”, “XX” means 5 kinds of DMX Channels Modes. You can press “UP” or “DOWN” to select the Channel Mode you desired.
CCT-In this menu, you can choose the brightness you desired. 1. Press “ENTER” and then press “UP” or “DOWN” to “CCT”. 2. Press “ENTER” you can chooose from “2700K” to “8000K” as you need. SET UP-In this menu, you can adjust the values of the function. 1. Press “ENTER” and then press “UP” or “DOWN” to “SET UP”. 2. Press “ENTER” and there has 6 options,then press “UP” or “DOWN” to choose the value you desired as below: 1) IR - You can press “ON” or “OFF” to choose whether you need to controll by this mode.
Mounting When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without any deformation. When installing the unit must be secured with a secondary safety attach-ment, e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.
CABLE CONNECTORS Cabling must have a male XLR connector on one end and a female XLR connector on the other end. DMX connector configuration GROUND caution:Do not allow contact between the ground and the fixture’s chassis ground. Grounding the ground can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify positive pole and to make sure the pins are not grounded or shorted to the shield or each other.
IR Controller DMX SLAVE AUTO 1 AUTO 2 SPEED SOUND 1 SOUND 2 UP 0 STROBE DOWN 1 2 3 4 W 5 6 7 8 9 R G Power on/off button DMX SLAVE AUTO 1 SOUND 2 UP DOWN Master-slave mode button. AUTO 2 Automatic mode button B SPEED SOUND 1 DMX button,to control DMX address when press this button.It is channel mode when double click. Speed adjustive button Sound mode button Up and down button,you can choose the STROBE 0 program that you need or numerical.
RDM---Remote Device Management RDM is a wild version of the DMX512-A protocol, allowing dimming stations and other control devices to be discovered through a DMX512 network, and then configuring, status monitoring, and managing intermediate and line end devices. It allows two-way communication between the lighting device or system controller and the connected RDM compatible device through the standard DMX.
IMPORTER B&K LUMITEC ZI – 2 Rue Alfred Kastler – 67850 Herrlisheim – France www.bklumitec.
