Operation Manual
User Manual - iRex Digital Reader 1000 Series
63
with the stylus, there is a calibration exercise you can use.
Calibrating the Stylus
Tap Ì Calibrate Stylus and follow the instructions given on the screen
SD Card Properties
You can see how much space is remaining on the SD Card, erase the contents
of the card, or reset the settings in the SD Card Properties section.
Card Storage Capacity
This meter will tell you how much used space and remaining space is left on the
SD card.
Format the SD Card
Formatting the SD card will erase all the information from the card. This also
means that the user manuals, iRex Companion Software, and settings will be
deleted.
Setup a SD Card for the Device
This function will install a folder named “iRex System”, factory settings, and the
iRex Companion Software to the SD card. Don’t worry; it won’t touch existing
information on the card.
Reset the Settings
Resetting the settings will return all of the settings to their original, factory
defaults.
About
Technical specications and information specic to your device will be found in
the About section. You will nd here:
Product Serial Number Ì
Main Software Version Number Ì
Kernel Version Number Ì
Firmware Version Number Ì
Acknowledgements Ì