Owner`s manual

DAB MODE

Turn on

1. Extend the antenna found on the back of radio, press STANDBY to switch on radio.

2. For initial use, radio will make a full scan and store all detected stations into memory.

Once the scanning is completed, the DAB/DAB+ stations will be displayed in

alphanumeric order. The first station in the list would be selected.



 Note: if no DAB/DAB+ signal is found in your area, it may be necessary for you to relocate your

radio.

Change to another DAB/DAB+ Station

While a program is playing, press  or



to cycle through available stations, press

SELECT to confirm and then your radio will connect the station you currently appointed.

Update Stations List

 Note: to do this order, placing your radio to stronger signal position is highly recommending!

1. Press MENU, and then press



to ‘Full scan’, press SELECT to confirm.



After a while, the radio is scanning all the DAB/DAB+ channels and add any new

available stations to the station list.

View Station Information

 Note: It is possible to view t more information that is displayed on the second line of the display.

1. Press MENU, and it will show ‘Display’, press SELECT to confirm.

2. Press  or



to check through the options: ‘Scrolling text’, ‘Signal strength’, ‘Program

Type’, ‘Ensemble’, ‘Frequency’, ‘Bit rate and code’, ‘Format’, and ‘Date’.

3. Press SELECT to confirm your target option.