Owner`s manual

16
Set Equaliser
 Note: Equaliser is a user-defined setting through Bass and Treble:
 Treble : +3,+2,+1,0,-1,-2,-3 level.
 Bass : +3,+2,+1,0,-1,-2,-3 level.
1. It can be activated from < System >  < Equaliser >. Press SELECT to confirm.
2. Press  or

to your preferred option: Treble or Bass, press SELECT to confirm. .
3. Press  or

to the level you favor, press SELECT to confirm, and it is done!
Set Backlight
 Note: You can adjust the backlight level to ‘High’, ‘Medium’ and ‘Low’. High backlight will make the
backlight bright and easy to view. Low backlight will dim the brightness by using less power and
making it less distracting at night.
Under Power on Condition
1. It can be activated from < System >  < Backlight >. Press SELECT to confirm.
2. While cursor point to ‘Power On’, press SELECT to confirm.

3. Press  or

to browse: ‘High’, ‘Medium’ and ‘Low’. Generally, we set ‘high’ for ‘Power
On’ mode.
4. Press SELECT to confirm.
Under Standby Condition
1. Refer to above steps 1-2, then press  or

to ‘Standby’, press SELECT to confirm.
2. Press  or

to browse: ‘High’, ‘Medium’ and ‘Low’. Generally, we set ‘low’ for
‘Standby’ mode.
3. Press SELECT to confirm.
Set Language
1. It can be activated from < System >  < Language >. Press SELECT to confirm.
2. Press  or

to your selecting language type, and then press SELECT to confirm.
Factory Reset
 Note: Doing this will delete all the preset stations, alarms and time settings, and return the radio to
its original factory settings.
1. It can be activated from < System >  < Factory Reset >. Press SELECT to confirm.
2. Press  or

to ‘Yes’, and then press SELECT to confirm.