Operation Manual

Connecting to wired network

Step 1 – Choose LAN Setting

 Note: a. make sure LAN cable connecting to LAN socket already.

1. Press MENU to goes into ‘Main Menu’, press SELECT to confirm.

2. Press or to < System settings >, press SELECT to confirm.

3. While cursor point to < Network >, press SELECT to confirm.

4. Press or to < Manual settings >, press SELECT to confirm.

5. While cursor point to < Wired >, press SELECT to confirm.

6. Press

or to < DHCP enable >, press SELECT to confirm.

 The LAN setting is OK now!

Step 2 – Enter Internet Radio mode

1. Press BACK repeatedly to go into this subdirectory.

Or, press MODE repeatedly until < Internet Radio > is showing up, then stop pressing.