Users Manual Part 1

Ma
r
s1717V-VSI Digital Flat Panel Detecto
r
Use
r
iRay Technology Co.
Figure 3-3-5
For Client mode, user can add the information of the access point with button “Add”, and set the
default access point that the detector should connects to with button “Select”.
Figure 3-3-6
After click “Write Config”button, the new setting of the wifi will be valid after the status shows
succeed.
The detector will connect to the access point when the data cable is removed.
What needs to be noticed is, the wifi frequency set on the “AP”interface will also be valid for
“Client”mode.