User's Manual

4.Software Setup
User Manual of NDT1013LA 49
The gain template generation process needs 5 images total, the UI gives the recommended KV and
target value, user can use different ones if needed.
After accepting the current image, the “Stage” will turn to 2/5, 3/5 and so on.
The current value box will show different colors, the definitons are as below:
Yellow: The current value is higher or lower than the expected one, user decides if acceptable. For
example, the expected value is 20000, and user needs 40000 as the gain piont, the yellow warning
can be ignored, and the value can be accepted still.
Green: The value is good.
Red: The value is un-acceptable.
3. After getting 5 images, user can generate the Gain template by “Generate” button, and the
process can be exited from at anytime by using “Cancel” button.
If “Download to FPD after generation” is checked, then the download UI will appear after
finishing generating. User can refer to the part of “Generate Defect Template File"