User's Manual

Flat Panel Detector NDT1013LA
User Manual of NDT1013LA 16
2. General Description
NDT1013LA（configuration：NDT1013LA, hereinafter referred as NDT1013LA ） is a wireless X-
ray flat panel detector based on amorphous flexible silicon thin-film transistor technologies. It is
developed to provide the good quality of radiographic image, which contains an active matrix of
3328×2560 with 100 um pixel pitch. The scintillator of NDT1013LA is CsI(Caesium Iodide) which is
direct deposit. Since NDT1013LA supports multiple trigger modes, which designed for field
inspection application, including Industry Non-Destructive Testing and Security Inspection..
2.1. Scope
This manual contains information about iRay NDT1013LA product. All operators must read and
understand this manual before using equipment. All information in this manual, including the
illustrations, is based on equipment prototype. If configuration of your equipment does not have
any of these items, information about these items in the manual does not apply to your
equipment.
2.2. Principle
Detectors contain a layer of scintillator material, which converts the x-rays into light. Directly
behind the scintillator layer is an amorphous silicon pixel array contains a photodiode which
generates an electrical signal in proportion to the light produced by the portion of scintillator layer
in front of the pixel. The signals from the photodiodes are amplified and encoded by additional
electronics positioned behind the sensor array in order to produce an accurate and sensitive digital
representation of the x-ray image.