User's Manual

Wireless Digital Flat Panel Detector NDT1013LA
10 User Manual of NDT1013LA
Power supply
Do not connect a multiple portable socket-outlet or
extension cord to the system.
Doing so may result in fire or electric shock.
To avoid the risk of electric shock, this equipment must
only be connected to power supply with protective earth.
Not doing so may result in fire or electric shock.
Securely plug the power cord into the AC outlet.
If contact failure occurs, or if metal objects come into contact with
the exposed metal prongs of the plug, fire or electric shock may
result.
Be sure to turn OFF the power to each piece of equipment
before connecting or disconnecting the cords.
Otherwise, you may get an electric shock that could result in death
or serious injury.
Be sure to hold the plug or connector to disconnect the
cord.
If you pull the cord, the core wire may be damaged, resulting in fire
or electric shock.
WARNING
Handling
Never disassemble or modify the equipment. No
modification of this equipment is allowed. Parts of the
NDT1013LA that are not serviced or maintained while in use
with the patient.
Doing so may result in fire or electric shock. Also, since the
equipment incorporates parts that may cause electric shock as well
as other hazardous parts, touching them may cause death or serious
injury.
Do not place anything on top of the equipment.
The object may fall and cause an injury. Also, if metal objects such as
needles or clips fall into the equipment, or if liquid is spilled, it may
result in fire or electric shock.
Do not hit or drop the equipment.
The equipment may be damaged if it receives a strong jolt, which
may result in fire or electric shock if the equipment is used without
being repaired.
Do not put the equipment and pointed objects together.
The equipment may be damaged. If so, the equipment should be
used in bucky.