User's Manual

Status Indicator
Power Indicator Lighting Status Description
Off Detector is OFF
Green ON Exposure is allowed
Green Blinking Detector is in WIFI mode switch status
Orange On Error
Mode Indicator
Power Indicator Lighting Status Description
Blue On Client mode is enabled
Blue Blinking
1. Press and hold the Mode button for approximately
seven seconds. When the status LED indicator
starts to blink, release the button.
The Mode LED indicator blinks blue indicating that
the detector is in Client mode.
2. Press and release the Mode button. The Mode
LED indicator will blink from blue to green,
indicating that WIFI mode has switched from
Client to AP.
3. The setting will be valid if the Mode button is not
pressed again for seven seconds.
Green On
AP mode is enabled
Operation
AL4609 2-13 2021-09-21