User's Manual

Operation

iRay Technology Co.

Ltd.……………………………………………………………………………………….…………………………

…………….………..

Prep CapMode Reserved Yes

Self CapEnable Reserved YES

Self Cap Span Time Should not be modified, and keep the original value YES

Trigger Mode Trigger mode YES

Sequence Interval Time Should not be modified, and keep the original value YES

Set Delay Time Exposure window for Freesync mode YES

Exp Window Time Exposure Window for Software/Inner mode, the value

should not be large than 10s

YES

Acquire Delay Time Reserved YES

Integrate Time Should not be modified, and keep the original value YES

Src Port Port number for detector NO

Src IP IP address for detector YES

Src MAC MAC address for detector YES

Dest Port Port number for PC NO

Dest IP IP address for detector NO

Self Clear Enable Related to Prep CapMode, the value should be

configured as “On” if Prep CapMode is configured as

PrepCapMode_ClearAcq, otherwise should be “Off”

If the Trigger Mode is Software/Inner, the value

should be “On”

YES

Self Clear Span Time Should not be modified, and keep the original value YES

HvgPrepOn Reserved YES

Hvg XRay Enable Reserved YES

Hvg XRay On Reserved YES

Tube Ready Time Reserved YES

Image Pkg Gap Time Reserved YES

Out Mode Cap Trigger Reserved YES