User's Manual

Mars1417V Digital Flat Panel Detector User Manual
60
................................................................................................................................................iRay
Technology Co. Ltd.
After exposure, click
“Acquire” to get the light
image
If the value meet the
expected value, click
“Accept”, then get the other
four images.
If the value does not meet the
expected value, please do not
click the “Accept”, and
adjust the exposure
dose,thenclickthe“PREP”
to get light image again
After getting five images,
click “Generate” to generate
gain template
Notes: 1 please use software post offset correction.
4.4.3. Defect Correction Template Generation
Before Defect template generating, make sure SID1.2m, no copper is required, the GUI of software
maybe different with the below figures.