User's Manual

Operation

iRay Technology Co.

Ltd.……………………………………………………………………………………….…………………………

…………….………..

4.1.3.3. Timing Setting

1. X ray generator is ready for X ray shooting and begins to release X ray.

2. Workstation receives “Exposure Prohibited” from Panel.

3. Panel starts uploading Pre-dark image and Light image to Workstation for preview. If hardware

offset is selected, panel would do offset first, and then upload preview image.

4. Panel starts uploading Post-dark image to Workstation. If hardware offset is chosen, panel would

do correction and calibration first, then upload processed image to Workstation.

5. Workstation receives “Exposure Enable” from Panel.

4.2. Connection Build

Open SDK and choose

product start connection

Confirm the IP address and

the Port are the same as the

value in config.ini.

The port should use the

default value of 28000

Note: 1. once changing connection from different network card, user must re-connect panel with

different IP address.