User's Manual

Installation
iRay Technology Co.
Ltd.……………………………………………………………………………………….…………………………
…………….………..
45
3.5.2. Wireless AP Mode
To complete wired connection configuration, user has to finish actions listed below.
Configuration o f detector
Either Wired cable can be used to configure panel wireless AP mode. The wired connection should be
used by the service operator only.
To start wired cable configuration, users should finish the configuration of external wireless AP, then
proceed to the steps below.
Connect panel to Workstation with
Ethernet Cable like 3.4.1
Click “Detector”
Select “wifi”
Choose AP mode
Click “Read Config” to get default
setting. Change SSID and password
setting , make sure SSID is different
from other already exist;