User's Manual

Installation
iRay Technology Co.
Ltd.……………………………………………………………………………………….…………………………
…………….………..
43
Configure LAN IP address IP address: 192.168.8.1
Subnet Mask: 255.255.255.0
External wireless AP reboot Apply above settings and reboot your wireless router.
Recover local network IPv4 setting
IP setting
Network mask setting
IP address: 192.168.8.188
Subnet mask: 255.255.255.0
Configuration o f detector
Either Wired Cable can be used to configure detector in wireless client mode. The wired connection
shouldbeusedbytheserviceoperatoronly.
To start configuration with wired cable. It is necessary to finish the configuration of external wireless
AP, then proceed to the steps below.
Connect panel to Workstation with
Ethernet Cable like 3.4.1