User's Manual

Installation
iRay Technology Co.
Ltd.……………………………………………………………………………………….…………………………
…………….………..
39
Unload Battery from battery charger.
Insert battery into battery charger.
Note the interface position as figure.
Press the battery to the bottom of battery
compartment.
3.3. Battery lock and activation
To ensure the safety of the battery during transportation or storage, the battery can be set to ship
mode, that is, the battery is locked without voltage output. So, it needs to exit ship mode before using
the battery for the first time.
 Two ways to enter ship mode
Item Steps
factory configuration /
Web write in
 Power the panel with adaptor, and turn on it, then connected it to the PC；
 Insert the battery；
 Type “http://192.168.8.8/cgi-bin/shipmode.cgi?action=on” in the Web to
enter ship mode
 Three ways to exit ship mode
Item steps
Web exit
 Power the panel with adaptor, and turn on it, then connected it to the PC；
 Insert the battery；
 Type “http://192.168.8.8/cgi-bin/shipmode.cgi?action=off” in the Web to
exit ship mode
Adaptor + FPD
 Power the panel with adaptor, and turn on it;