User's Manual

Mars1417V Digital Flat Panel Detector User Manual
32
................................................................................................................................................iRay
Technology Co. Ltd.
2.10.3. Required configuration
The wireless card and the detector must work on the same IP segment such as 192.168.8.XXX
They must support IEEE 802.11a/b/g/n/ac.
2.10.4. Technical specifications
Item Description
Wireless Standard IEEE 802.11a/b/g/n/ac
Frequency Range
2.412~2.472GHz: ch1~ch13
5.18~5.24GHz: ch36~ch48
5.745~5.85GHz: ch149~ch165
Data Transmission Rate
802.11b: Max. 11Mbps
802.11a/g: Max. 54Mbps
802.11n: Max. 300Mbps (MIMO 2x2)
802.11ac: Max. 867Mbps(MIMO 2x2)
Modulation
802.11b:
CCK, DQPSK, DBPSK
802.11a/g/n:
64 QAM, 16 QAM, QPSK, BPSK
802.11ac:
256 QAM, 64 QAM, 16 QAM, QPSK, BPSK
Security WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit
2.10.5. Intended information flow
The detector sends image data acquired to the workstation. The workstation sends users’
commands to the detector. Please refer to the operation manual of the Console for detail.
2.10.6. Hazardous situations resulting from failure of the IT-network
1. Failure of completing essential performance
2. Failure of finishing configuration of product
3. Operating system is not compatible
4. Change or update software failed
5. Compatibility of interface
6. Data transfer protocol error
7. Inconsistency of interface or format leads to data distortion;
8. Data output failed;
2.10.7. Warning
Connection of the main unit to an IT-network that includes other equipment could result in
previously unidentified risks